First Order Sea Clutter Cross Section for HF Hybrid Sky-Surface Wave Radar

This paper presents a modified method to simulate the first order sea clutter cross section for high frequency (HF) hybrid sky-surface wave radar, based on the existent model applied in the bistatic HF surface wave radar. The modification focuses on the derivation of Bragg scattering frequency and the ionosphere dispersive impact on the clutter resolution cell. Meanwhile, an analytic expression to calculate the dispersive transfer function is derived on condition that the ionosphere is spherical stratified. Simulation results explicate the variance of the cross section after taking account of the influence triggered by the actual clutter resolution cell, and the spectral width of the first order sea clutter is defined so as to compare the difference. Eventually, experiment results are present to verify the rationality and validity of the proposed method

Measurement of Ultra-Low Potassium Contaminations with Accelerator Mass Spectrometry

Levels of trace radiopurity in active detector materials is a subject of major concern in low-background experiments. Among the radio-isotopes, \k40 is one of the most abundant and yet whose signatures are difficult to reject. Procedures were devised to measure trace potassium concentrations in the inorganic salt CsI as well as in organic liquid scintillator (LS) with Accelerator Mass Spectrometry (AMS), giving, respectively, the \k40-contamination levels of $\sim 10^{-10}$ and $\sim 10^{-13}$ g/g. Measurement flexibilities and sensitivities are improved over conventional methods. The projected limiting sensitivities if no excess of potassium signals had been observed over background are $8 \times 10^{-13}$ g/g and $3 \times 10^{-17}$ g/g for the CsI and LS, respectively. Studies of the LS samples indicate that the radioactive contaminations come mainly in the dye solutes, while the base solvents are orders of magnitude cleaner. The work demonstrate the possibilities of measuring naturally-occurring isotopes with the AMS techniques.Comment: 18 pages, 4 figures, 3 table

New rosette tools for developing rotational vibration-assisted incremental sheet forming

A major limitation of the incremental sheet forming (ISF) is its difficulties to manufacture hard-to-form materials. The existing ISF process variants require additional systems or devices, which compromises the process flexibility and simplicity, the unique advantages of the ISF. In this study, a novel type of rosette tools is proposed for developing a new ISF process to improve material formability, named as Rotational Vibration-assisted ISF (RV-ISF). A hard-to-form material, magnesium alloy AZ31B, has been successfully formed in the RV-ISF experiment by creating low-frequency and low-amplitude vibrations, and elevated temperatures at the local forming zone in the range of 250–450 °C. By developing the new RV-ISF, it has achieved a 60% increase in fracture depth than that by friction-stir ISF and more than 46% reduction in forming force than that by the conventional ISF. Experimental evaluation and analytical prediction of temperature increase, forming force and flow-stress reduction have concluded that the combined thermal effect and vibration softening is the key mechanism leading to the significant formability enhancement. The results show that both the rosette tool design and tool rotational speed are critical factors determining heat generation and transfer as well as vibration frequency and amplitude. Investigation on microstructural evolution has revealed that the low-frequency and low-amplitude vibrations created by the rosette tool have activated dislocations and dynamic recrystallization, and produced refined grains and increased micro hardness. The new RV-ISF developed has potentials to manufacture other hard-to-form materials and complex geometries of sheet products, overcoming the formability limitation of the current ISF technology

Measurement of Trace I-129 Concentrations in CsI Powder and Organic Liquid Scintillator with Accelerator Mass Spectrometry

Levels of trace radiopurity in active detector materials is a subject of major concern in low-background experiments. Procedures were devised to measure trace concentrations of I-129 in the inorganic salt CsI as well as in organic liquid scintillator with Accelerator Mass Spectrometry (AMS) which leads to improvement in sensitivities by several orders of magnitude over other methods. No evidence of their existence in these materials were observed. Limits of < 6 X 10^{-13} g/g and < 2.6 X 10^{-17} g/g on the contaminations of I-129 in CsI and liquid scintillator, respectively, were derived.These are the first results in a research program whose goals are to develop techniques to measure trace radioactivity in detector materials by AMS.Comment: Proceedings of 10th International Conference on Accelerator Mass Spectrometr

Respuestas del δ13C foliar y características foliares a la precipitación y temperatura en un ecosistema árido del noroeste de China

El δ13C foliar es ampliamente usado para explicar estrategias relacionadas con la disponibilidad de recursos en diferentes ambientes. Sin embargo, la respuesta conjunta del δ13C foliar a la precipitación y temperatura así como la relación entre el δ13C foliar y las características foliares no están claras. El δ13C foliar y su relación con las características foliares [tamaño de hoja (LS), longitud foliar (LL), ancho foliar (LW), relación entre la longitud y el ancho foliar (L:W), área foliar específica (SLA) y concentración de N foliar (en una base de peso seco) (Nmass)] fueron investigadas en la especie de arbusto dominante Nitraria tangutorum Bobr en la región árida (Dengkou y Minqin) del noroeste de China. El estudio se efectuó bajo condiciones de varias cantidades de precipitación simuladas (PGS) y temperaturas ambientales (TGS) en las estaciones de crecimiento de 2008, 2009 y 2010. Los resultados mostraron que LS, LW, LL, SLA y Nmass se incrementaron significativamente cuando las cantidades de PGS se incrementaron, pero hubo tendencias de reducción en dichas características cuando las TGS aumentaron. Sin embargo, la mayoría de las relaciones negativas entre las características foliares y las TGS no fueron obvias en Minqin. En ambos sitios, L:W se incrementó cuando las PGS y TGS aumentaron. Hubo un cambio en la relación negativa entre el δ13C foliar-PGS a través de Minqin y Dengkou, lo cual condujo a la falta de efectos de la precipitación en el δ13C foliar a través de ambos sitios, y mayor δ13C foliar a menor precipitación en Minqin. A través de Minqin y Dengkou, PGS solo pudo explicar un 14% de la variación en el δ13C foliar. La combinación de PGS y TGS pudo explicar un 64% de la variación en el δ13C foliar. Las características foliares (LW y L:W) mejoraron aún más la estimación del δ13C foliar. Las combinaciones de PGS, TGS, LW y L:W pudieron explicar un 84% de la variación en el δ13C foliar. Nuestro estudio demostró la importancia de las características foliares en explorar las respuestas del δ13C foliar a cambios globales en ecosistemas áridos.Leaf δ13C is widely used to explain plant strategies related to resource availability in different environments. To understand the coupled response of leaf δ13C to precipitation, temperature and the relationship between leaf δ13C and leaf traits in arid ecosystems, the leaf δ13C and leaf traits (leaf size (LS), leaf length (LL), leaf width (LW), leaf length to width ratio (L:W), specific leaf area (SLA) and mass-based leaf nitrogen concentration (Nmass)) of Nitraria tangutorum Bobr. under simulated increasing precipitation (PGS) and ambient temperature (TGS) in plant growing season from 2008 to 2010 and the relationships between leaf δ13C and leaf traits were investigated in the arid region (Dengkou and Minqin) of northwestern China. Our results showed that LS, LW, LL, SLA and Nmass significantly increased with increasing PGS, but had downward tendencies with increasing TGS although the majority of the negative relationships between leaf traits and TGS were not obvious in Minqin. At the two study sites, L:W increased simultaneously with increasing PGS and TGS. There was a shift in the negative leaf δ13C-PGS relationship across Minqin and Dengkou, which conduce to the lacking effect of precipitation on leaf δ13C across the two sites and higher leaf δ13C in lower precipitation fields in Minqin. Across Minqin and Dengkou, PGS could only explain 14% of the variation in leaf δ13C. The combinations of PGS and TGS could explain 64% of the variation in leaf δ13C. Leaf traits (LW and L:W) could be used to further improve the estimation of leaf δ13C. The combinations of PGS, TGS, LW and L:W could explain 84 % of the variation in leaf δ13C. Our study demonstrated the importance of leaf traits in exploring the responses of leaf δ13C to global changes in arid ecosystems.Fil: Xin, Z.M.. Chinese Academy of Forestry. Institute of Desertification Studies; China. Chinese Academy of Forestry. Experimental Center of Desert Forestry; ChinaFil: Liu, M.H.. Chinese Academy of Forestry. Experimental Center of Desert Forestry; ChinaFil: Lu, Q.. Chinese Academy of Forestry. Institute of Desertification Studies; China. State Forestry Administration. Kumtag Desert Ecosystem Research Station; ChinaFil: Busso, Carlos Alberto. Universidad Nacional del Sur. Departamento de Agronomía; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Centro de Recursos Naturales Renovables de la Zona Semiárida. Universidad Nacional del Sur. Centro de Recursos Naturales Renovables de la Zona Semiárida; Argentina. State Forestry Administration. Kumtag Desert Ecosystem Research Station; ChinaFil: Zhu, Y.J.. State Forestry Administration. Kumtag Desert Ecosystem Research Station; China. Chinese Academy of Forestry. Institute of Desertification Studies; ChinaFil: Li, Z.. Chinese Academy of Forestry. Experimental Center of Desert Forestry; ChinaFil: Huang, Y.R.. Chinese Academy of Forestry. Experimental Center of Desert Forestry; ChinaFil: Li, X.L.. Chinese Academy of Forestry. Experimental Center of Desert Forestry; ChinaFil: Luo, F.M.. Chinese Academy of Forestry. Experimental Center of Desert Forestry; ChinaFil: Bao, F.. Chinese Academy of Forestry. Institute of Desertification Studies; ChinaFil: Qian, J.Q.. Henan Agricultural University. College of Forestry; ChinaFil: Li, Y.H.. Chinese Academy of Forestry. Institute of Desertification Studies; China. State Forestry Administration. Kumtag Desert Ecosystem Research Station; Chin

Effect of the SiC Particle Orientation Anisotropy on the Tensile Properties of a Spray-Formed SiCp/Al-Si Composite

The effects of the SiC particle orientation anisotropy on the tensile properties of spray-formed SiCp/Al-Si composites was investigated and compared with that of the unreinforced matrix alloy. The addition of SiC particles increased the elastic modulus but decreased ultimate tensile strength and elongation of an Al–Si alloy under peak-aged conditions. Microstructure disolayed a preferred orientation of the reinforcement particles, which were inclined to align parallel to the extrusion axis. Meanwhile, the degree of orientation anisotropy turned to be higher with larger reinforcement sizes particle. The elastic modulus, tensile strength and elongation in the longitudinal orientation (parallel to the extrusion axis) were higher than those in the transverse orientation (perpendicular to the extrusion axis). The fracture mechanism in a composite with 4.5 m particles was attributed to interfacial debonding between SiC and matrix in the two orientations. However, in case of aluminum reinforced wild 20 m particles, both cracking of SiC particles in the longitudinal orientation and the interfacial debonding in the transverse orientation played an important role in fracture.Исследовано влияние анизотропии, определяемой ориентацией SiC частиц, на механические свойства при растяжении SiCp/Al-Si композита, полученного методом напыления. Результаты исследования SiCp/Al-Si композита сопоставлены с таковыми сплава с неупрочненной матрицей. При растяжении Аl-Si сплава в условиях максимального старения благодаря введению SiC частиц модуль упругости увеличивается, а предел прочности и удлинение уменьшаются. При определении характеристик микроструктуры было установлено, что упрочняющие частицы преимущественно ориентированы в направлении, параллельном оси экструзии. При значительном упрочнении степень анизотропии, определяемой ориентацией частиц, более высокая. Значения модуля упругости, предела прочности и удлинения при растяжении в продольном направлении (параллельно оси экструзии) оказываются выше, чем в поперечном (перпендикулярно оси экструзии). Признаком механизма разрушения композита с частицами размером 4,5 мкм полагают граничное разделение между SiC частицами и матрицей в двух направлениях. В случае упрочненного алюминия с частицами размером 20 мкм растрескивание SiC частиц в продольном направлении и граничное разделение в поперечном направлении играют важную роль в процессе разрушения.Досліджено вплив анізотропії, що визначається орієнтацією SiC частинок, на механічні властивості при розтязі SiCp/Al-Si композита, отриманого методом напилення. Результати дослідження SiCp/Al-Si композита зіставляли з такими сплава, що має незміцнювану матрицю. При розтязі Al-Si сплаву в умовах максимального старіння завдяки введенно SiC частинок модуль пружності збільшується, а границя міцності і подовження зменшуються. Визначення характеристик мікроструктури показало, що зміцнювані частинки переважно орієнтовані у напрямку, паралельному осі екструзії. При значному зміцненні ступінь анізотропії, що визначається орієнтацією частинок, значно вища. Значення модуля пружності, границі міцності і подовження при розтязі в поздовжньому напрямку (паралельно осі екструзії) більші, аніж у поперечному (перпендикулярно до осі екструзії). Ознакою механізму руйнування композита з частинками розміром 4,5 мкм вважають граничний розподіл між SiC частинками і матрицею у двох напрямках. У випадку зміцненого алюмінію з частинками розміром 20 мкм розтріскування SiC частинок у поздовжньому напрямку і граничний розподіл у поперечному напрямку відіграють важливу роль у процесі руйнування

Optimally shaped terahertz pulses for phase retrieval in a Rydberg atom data register

We employ Optimal Control Theory to discover an efficient information retrieval algorithm that can be performed on a Rydberg atom data register using a shaped terahertz pulse. The register is a Rydberg wave packet with one consituent orbital phase-reversed from the others (the ``marked bit''). The terahertz pulse that performs the decoding algorithm does so by by driving electron probability density into the marked orbital. Its shape is calculated by modifying the target of an optimal control problem so that it represents the direct product of all correct solutions to the algorithm.Comment: 6 pages, 3 figure

Solving variational inequalities defined on a domain with infinitely many linear constraints

We study a variational inequality problem whose domain is defined by infinitely many linear inequalities. A discretization method and an analytic center based inexact cutting plane method are proposed. Under proper assumptions, the convergence results for both methods are given. We also provide numerical examples to illustrate the proposed method

A microsatellite marker for yellow rust resistance in wheat

Bulk segregant analysis (BSA) was used to identify molecular markers associated with yellow rust disease resistance in wheat (Triticum aestivum L.). DNAs isolated from the selected yellow rust tolerant and susceptible F-2 individuals derived from a cross between yellow rust resistant and susceptible wheat genotypes were used to established a "tolerant" and a "susceptible" DNA pool. The BSA was then performed on these DNA pools using 230 markers that were previously mapped onto the individual wheat chromosomes. One of the SSR markers (Xgwm382) located on chromosome group 2 (A, B, D genomes) was present in the resistant parent and the resistant bulk but not in the susceptible parent and the susceptible bulk, suggesting that this marker is linked to a yellow rust resistance gene. The presence of Xgwm382 was also tested in 108 additional wheat genotypes differing in yellow rust resistance. This analysis showed that 81% of the wheat genotypes known to be yellow rust resistant had the Xgwm382 marker, further suggesting that the presence of this marker correlates with yellow rust resistance in diverse wheat germplasm. Therefore, Xgwm382 could be useful for marker assisted selection of yellow rust resistances genotypes in wheat breeding programs

Long-distant contribution and χc1\chi_{c1} radiative decays to light vector meson

The discrepancy between the PQCD calculation and the CLEO data for $\chi_{c1}\to \gamma V$ ($V=\rho^0,\,\omega,\,\phi$) stimulates our interest in exploring extra mechanism of $\chi_{c1}$ decay. In this work, we apply an important non-perturbative QCD effect, i.e., hadronic loop mechanism, to study $\chi_{c1}\to \gamma V$ radiative decay. Our numerical result shows that the theoretical results including the hadronic loop contribution and the PQCD calculation of $\chi_{c1}\to \gamma V$ are consistent with the corresponding CLEO data of $\chi_{c1}\to \gamma V$. We expect further experimental measurement of $\chi_{c1}\to \gamma V$ at BES-III, which will be helpful to test the hadronic loop effect on $\chi_{c1}$ decay.Comment: 7 pages, 2 figures. Accepted for publication in Eur. Phys. J.